The WARHAMMER Mod2 AR-15 Ambidextrous Charging Handle by Breek Arms

The WARHAMMER Mod2 AR-15

Breek Arms

$49.99
(497 reviews) Write a Review
Get $5 off a T-Shirt with any Warhammer purchase:
Visit our "Gear" section and add a shirt to cart to see discount!
The Breek Arms WARHAMMER Mod2 ambi charging handle is a simple and affordable upgrade that will substantially increase the use of your AR-15. Easily grab on either side of the handle and you can quickly charge your rifle even with large gloves with the textured grooves that are cut into the latch handles. The wide set-back latches work great for large optics. The low profile design keeps it slim and sleek looking without sacrificing functionality. Made entirely out of 7075 aluminum for added strength and durability!
 
The new MOD2 design features improvements for further reducing gas blowback in the shooter's face. The relief cuts on the top and bottom of the stem are designed to help direct extra gas out the side and away from your face. And for any gas that does manage to go straight back, we increased the height of the shelf to better cover the back of the upper. These modifications help improve the shooting experience, especially when shooting suppressed!
 
  • Material: 7075-T6 aluminum
  • Fits all mil spec AR15/M16 Rifles
  • Finish: Type III hard-coat anodized
  • Perfect replacement for any factory charging handle
  • Latches are also 7075-T6 aluminum
  • Oversize ambidextrous release levers on both sides, 2.78" total width across the handles
  • Set-Back Latches work great for large optics
  • Allows for one handed manipulation
  • Higher Rear Shelf and Relief Cuts to Divert Suppressor Gasses
  • Weighs in just under 1 ounce!
  • No gun smith required
  • Made in America

Don't trust it? Easy, check out our Warranty & Refund Policy. You'll find that if at anytime the charging handle breaks or fails, we will replace it at no cost or give you a full refund for the lifetime of the product and even at this price point! 

497 Reviews Hide Reviews Show Reviews

  • 5
    War hammer mod 2

    Posted by Joel Lima on Oct 26th 2021

    Bought 2 of the mod 2 warhammer charging handles. Great item for the price fast shipping would recommend to anyone

  • 5
    WARHAMMER MOD2 AR-15 AMBI CHARGING HANDLE

    Posted by J.J. Olivarez on Oct 25th 2021

    I have built several ARs and have mainly used regular mil-spec charging handles in the past but an injury to my left elbow made it harder to pull the mil-spec handle with my left hand. I began to look at the ambidextrous charging handle so that I could pull the handle with my right hand, but the prices made me hesitate on buying. I found Breek Arms after looking around for something that looked well built but was not eye popping expensive. I took a chance on Break Arms and I am glad I did. This charging handle has met all of my expectations and has helped me avoid using my left hadn't and arm to charge my AR. The charging handle is solidly built. I have been so impressed that I have begun to replace all of my mil-spec handles to these. The look it brings to my ARs is an added bonus!! The handle looks sleek and tough!! Thanks to Breek Arms for their reasonably priced charging handle. This handle really punches above its price!!

  • 5
    WarHammer Charging Handle

    Posted by Jeff Wrede on Oct 19th 2021

    Highly Recommend! This WarHammer Ambi Charging Handle is better than the $50 - $80 charging handles. Easy to grasp and use! Will buy again!

  • 5
    The WARHAMMER Mod2 AR-15 Ambidextrous Charging Handle by Breek Arms

    Posted by Geena Tucker on Oct 15th 2021

    My husband purchased the WARHAMMER for me recently, and I really like it. The fit, finish and quality are outstanding. It actually runs better and smoother than the OEM handle that came in my rifle.

  • 4
    Great charging handle

    Posted by Charles C Cavendish on Oct 12th 2021

    Great charging handle just one complaint it gets caught up when u charge the handle sometimes when u return into battery

  • 5
    Warhammer

    Posted by Ray on Oct 12th 2021

    Best upgrade you can do at a fraction of the other guys prices. I own 5 so that’s something. I own other charging handles that are almost triple the price. And these preform just as well as the others in some points better.

  • 2
    Not fully ambi

    Posted by Ben W on Oct 12th 2021

    Installed it looks great and works fine while pulling on the left side or both levers at the same time but when pulling on the right the latch does not lift enough to clear the catch without jiggling the handle. After charging it a few times from the right it carved a small channel in the catch lip. No big deal but kinda annoying.

  • 5
    Warhammer Bambi charging handle

    Posted by Wally Kilburg on Oct 8th 2021

    I have a couple well known, well promoted charging handles that came with the built rifles I purchased. They all work as intended but the Warhammer is my hands down favorite and I'm glad I found it. It's got that texturing on the inside grip part and it works really well, with or without gloves.The unlatching action is a short stroke and very positive as is the latching action. Little things that make a difference. This was a replacement on a stock handle for a project rifle I'm modifying and I will use a Warhammer on future projects for sure. Like I said, a great find.

  • 5
    Works as described. My stock charging was well made but it would not divert gas from my face . The war hammer helps that exceptionally. I also use a large scope on my mar so the larger handle are great.

    Posted by Brian freeman on Oct 7th 2021

    Well worth the money well made product. And looks mean on my msr .

  • 5
    The Warhammer Mod2

    Posted by JAMIE GREENE on Oct 5th 2021

    Absolutely the best value in charging handles! Probably the best "Bang for the buck" AR platform product out there. It looks great and performs as well as charging handles I've paid 3x more for.

  • 5
    War handle

    Posted by Robert young on Sep 30th 2021

    Great product looks great thanks

  • 1
    Junk

    Posted by Rick on Sep 10th 2021

    In a word “Junk”! I purchased is for a .300 blackout pistol build. It looks cool but does not function properly. This charging handle has a tremendous amount of flex to it. When charging the weapon it bends along the shaft causing friction. Also it does not lock in place. After firing a round the charging handle comes loose and comes back and hits you in the face. Needless to say this charging handle is going in the drawer.

Videos Hide Videos Show Videos

Related Products

!