RNGR M-LOK AR-15 Handguard

$79.99
(13 reviews) Write a Review
SKU:
BRK1167

Breek Arms mission is to provide quality parts at competitive prices and the DELTA handguard lineup release is the next step. We’ve found the perfect formula between cost, quality, durability, aesthetics, and weight reduction for our newly developed AR15 handguards!

The Newly Released RNGR was developed specifically for suppressor builds, each length is designed to fit common barrel lengths and leave room for a suppressor. It also works well for short builds - coming in as short as 5.25 inches long it is the perfect handguard for any short barrel AR build. Though it is short, it still has room for 1 M-LOK slot on the bottom and 2 slots on each side. In addition, the other lengths provide multiple additional length options to suit your custom build.

Highlights

For use on AR-15 & M4 variants (223, 556, & 300blk)

T6-6061 Type III Hard Coat Anodized Aluminum

Cutouts made to reduce weight and provide barrel ventilation

Magpul Licensed M-LOK Mounting System

Clamp on Barrel Nut System with spacer allows for a rock solid clamp, holding the handguard in place easily

Steel Barrel Nut is serrated for increased grip and made from high strength steel and coated for durability and longevity

Comes with our Lifetime Warranty so you can be sure it’ll last a lifetime

Weight & Length Specs

Total Length Top Length Total Weight (w/Bbl Nut)
5.25 Inch 5.25"

7.3 oz

7.3 Inch 7.3"

 

10.375 Inch 10.375"

 

15.75 Inch 15.75"

 

Advanced Specs

Barrel Nut Weight: 3.5 Ounces

Cutout Length (from longest point): 0.275 Inches

Inside Diameter (ID): 1.375 Inches

Front Outside Diameter (OD): 1.605 Inches

ID + Top Gas Tube Channel: 1.73 Inches

Gas Tube Channel Width: 0.475 Inches

Engraving: Breek Arms Dark Engraved Logo and M-LOK Dark Engraved Logo

Gas Block Compatibility: Low profile & adjustable low-profile gas blocks

Barrel Nut Wrench Add-On avialable

Color: Black (No other colors are offered at this time)

Installation Instructions

  1. Torque barrel nut to 45 ft pounds 
  2. Medium Strength Thread Locker on the barrel nut is not necessary but recommended
  3. Line the handguard top rail to the AR upper receiver rail for a seamless fit
  4. Install spacer and torque two 10/32 bolts to 40 inch pounds (Spacer required to ensure flat alignment of the clamping wings)

Our handguards are named after some of the most famous WW2 Airplanes. See our list of handguard names to read the incredible stories behind these famous war machines.

See our FAQ page for common questions regarding handguards and other parts.

  • BRK1100_Crows foot wrench .375 inch drive 1.25 inch wrench opening_for Delta line_1

Breek Arms mission is to provide quality parts at competitive prices and the DELTA handguard lineup release is the next step. We’ve found the perfect formula between cost, quality, durability, aesthetics, and weight reduction for our newly developed AR15 handguards!

The Newly Released RNGR was developed specifically for suppressor builds, each length is designed to fit common barrel lengths and leave room for a suppressor. It also works well for short builds - coming in as short as 5.25 inches long it is the perfect handguard for any short barrel AR build. Though it is short, it still has room for 1 M-LOK slot on the bottom and 2 slots on each side. In addition, the other lengths provide multiple additional length options to suit your custom build.

Highlights

For use on AR-15 & M4 variants (223, 556, & 300blk)

T6-6061 Type III Hard Coat Anodized Aluminum

Cutouts made to reduce weight and provide barrel ventilation

Magpul Licensed M-LOK Mounting System

Clamp on Barrel Nut System with spacer allows for a rock solid clamp, holding the handguard in place easily

Steel Barrel Nut is serrated for increased grip and made from high strength steel and coated for durability and longevity

Comes with our Lifetime Warranty so you can be sure it’ll last a lifetime

Weight & Length Specs

Total Length Top Length Total Weight (w/Bbl Nut)
5.25 Inch 5.25"

7.3 oz

7.3 Inch 7.3"

 

10.375 Inch 10.375"

 

15.75 Inch 15.75"

 

Advanced Specs

Barrel Nut Weight: 3.5 Ounces

Cutout Length (from longest point): 0.275 Inches

Inside Diameter (ID): 1.375 Inches

Front Outside Diameter (OD): 1.605 Inches

ID + Top Gas Tube Channel: 1.73 Inches

Gas Tube Channel Width: 0.475 Inches

Engraving: Breek Arms Dark Engraved Logo and M-LOK Dark Engraved Logo

Gas Block Compatibility: Low profile & adjustable low-profile gas blocks

Barrel Nut Wrench Add-On avialable

Color: Black (No other colors are offered at this time)

Installation Instructions

  1. Torque barrel nut to 45 ft pounds 
  2. Medium Strength Thread Locker on the barrel nut is not necessary but recommended
  3. Line the handguard top rail to the AR upper receiver rail for a seamless fit
  4. Install spacer and torque two 10/32 bolts to 40 inch pounds (Spacer required to ensure flat alignment of the clamping wings)

Our handguards are named after some of the most famous WW2 Airplanes. See our list of handguard names to read the incredible stories behind these famous war machines.

See our FAQ page for common questions regarding handguards and other parts.

13 Reviews Hide Reviews Show Reviews

  • 5
    5.25 free float RNGR

    Posted by Dennis on Sep 3rd 2020

    This item is awesome, the anodizing is clean and comes with all hardware. Planned to use this with a AR-9 enhanced upper for my project and it looks like it was a match made in heaven. The geometry on the Upper aligned to the RNGR. Defiantly will make my project pop. I did get a QD swivel with it and some hardware but no location on the handguard for it I will need a QD mount if I decide to go with that. If you looking for an handguard look no further.

  • 5
    RNGR 7.3” Handguard , weight and finish are excellent .have not installed yet

    Posted by Doc on Aug 10th 2020

    Breekarms products and service are excellent as well !!

  • 5
    RNGR HANDGAURD 15.75 INCH

    Posted by Jose on Jul 20th 2020

    Absolutely love this rail looks very sleek and cool. It is super easy to put on your rifle if you have the correct tools this rail looks and feels expensive perfect for budget builds i will definitely use more breek arms products.